F.A.Q
*
Dual mode can be seen when the sign is off or when backlit
* Light Weight A typical display with size of 6" x 12" weights ~10
oz
* Thickness 1mm thick
* Flexible can be bent to contour to curved surface (5mm
radius)
* Very Rugged same as handling a piece of vinyl
* Installation No light box or heavy infrastructure involved.
Installs easily with Velcro tabs
* Viewing angle better than 160 viewing - effective from a broad
field of direction
* Can be seen in high artificial light, dim light or even foggy
conditions
* Efficient low power consumption - Typically 5 - 10 watts
* Light produced is a Cold light and power is not lost from heat
generation
* Indoor/Outdoor Non-glare for easy viewing
* Can be easily embedded in or attached to safety wear
* Vibration and impact resistant, no damage in transit.
* No catastrophic failure, no filament to burnout for greater
reliability
SIGN MATERIAL
Multi-laminate construction
SIZES & SHAPES
Any shape up to 36" x 72" of animated area Customised
VIEWING ANGLE
Better than 160 Degrees
BRIGHTNESS
Min 100 cd.m2
LIFE
20,000 hours + (Life is increased if sign is animated or
cycled)
WEIGHT
A typical display with size of 6" x 12" weights ~10 oz
SAFETY
No Ultraviolet Radiation emitted
INDOOR/OUTDOOR
Can be operated in both environments
OPERATING TEMP
- 30C to + 70C
STORAGE TEMP
- 40C to + 85C
HUMIDITY RANGE
5% to 95% Humidity
OPERATING CURRENT
Maximum to 0. 25 mA/cm2
OPERATING POWER
Low power consumption Approx 5-10 watts - "OPEN" sign
POWER RESOURCES
DC 1.5V to 24V and or AC110/220V
POWER INVERTER
Different power configurations to optimize sign
parameters
SUPPLY VOLTAGE
AC 60V to AC 220V
SUPPLY FREQUENCY
1.5KHz sine Wave at AC 100Vrms